Our normal office hours are 8:30AM-4:30PM ESDT. To view pricing, typical ship schedules, or place an order, just click on a product tab and make your selection which you can customize. You may print or e-mail yourself a quote 24/7 without factory assistance, or send in a quote request for un-priced items.Straval now has a facebook page https://www.facebook.com/Straval
Products - Strainers
Below is a condensed section of our products. Consult factory for models not listed here and for custom or special valves for OEMs.
Metal Type
Threaded Npt
 |
SBS-10
Simplex basket strainer From .001" openings. 25 micron (#500 wire mesh) to 3/16 (.188) dia perf For water, oil, steam air, chemicals, gas 150-4000 PSI max 1/2"-2" NPT, 1/2"-2" flanged Parallel piping (outlet is lower than inlet) 303 & 316 stainless steel, Hastelloy, Monel, titanium, steel |
 |
SBS-10-EX
Hastelloy, Monel, Titanium, A20, Simplex basket strainer From .001" openings. 25 micron (#500 wire mesh) to 3/16 (.188) dia perf For water, oil, steam air, chemicals, gas 150-4000 PSI max 1/2"-2" NPT, 1/2"-2" flanged Parallel piping (outlet is lower than inlet) |
 |
SBV-05
Quick opening, V-band clamp with Buna or Viton gasket From .0025" openings. 60 micron (#250 wire mesh) to 3/16 (.188) dia perf 150 PSI max pressure rating 1/2"-2" NPT, 1/2"-2" flanged Parallel piping (outlet is lower than inlet) 316 stainless steel |
 |
STF-05
In-line strainer fitting, wire mesh screen #20-#60 wire mesh (.034-.015" particle retention) Finer meshes to #500 (0.001 in, 25 micron) with perf backing available in model STF05-1 For water, oil, air, chemicals, gas From 150 to 2500 PSI pressure ratings depending on materials 1/4"-1" NPT, 1/2"-1" flanged 303 & 316 stainless steel, Hastelloy, Monel, titanium |
 |
STF-05-EX
Hastelloy, Monel, Titanium, Alloy20: In-line strainer fitting, wire mesh screen #20-#60 wire mesh (.034-.015" particle retention) Finer meshes to #500 (0.001 in, 25 micron) with perf backing available in model STF05-1 For water, oil, air, chemicals, gas From 150 to 2500 PSI pressure ratings depending on materials 1/4"-1" NPT, 1/2"-1" flanged |
