Our normal office hours are 8:30AM-4:30PM ESDT. To view pricing, typical ship schedules, or place an order, just click on a product tab and make your selection which you can customize. You may print or e-mail yourself a quote 24/7 without factory assistance, or send in a quote request for un-priced items.Straval now has a facebook page https://www.facebook.com/Straval
Products - Plastic Valves
Below is a condensed section of our products. Consult factory for models not listed here and for custom or special valves for OEMs.
Pressure Regulators
 |
PRS09i-P
Balanced inlet eliminates supply pressure sensitivity. PTFE wetted diaphragm. Available in 1/2"-2" NPT For water, chemicals, solvents. Max inlet 150 PSI with adjustable pressure range of 8-80 PSI. (5.5 Bar) Soft seat construction for positive shut off in EPDM, BUNA, or Viton ™. Configuration: Side inlet and side outlet constructed from PVC, CPVC, or PVDF. |
Back Pressure/Bypass Valves
 |
BPS05-P
High flow, Balanced Piston Type, Back Pressure Regulator/Bypass Valve 5-125 Psi, max. Available NPT threaded in ½”-2” sizes. Intended for applications where valve may be exposed to pressure at the discharge port. Valves are ideally suited for chemical process, corrosive environments, and water or oil service. No Metals in flow wetted areas. Configuration: Bottom inlet, side outlet in PVC, CPVC, or PVDF construction with soft seats for bubble tight leakage in EPDM, BUNA, and Viton ™. For relief valve see series RVC05-P. |
 |
BPS09-P
All Plastic Back Full Flow Pressure Regulator/Bypass Valve - Diaphragm type Elastomeric diaphragm rated temp to 350 Deg F (176 Deg C), 300 psi burst Rated max 80 Psi (5.2 bar) max operating (multiple spring ranges)High flow, precise pressure control For water, oil, air, chemicals, gas 1/2"-3" NPT 303 & 316 Stainless steel, Titanium, Hastelloy, Monel |
Relief Valves
 |
RVC05-P
High flow Pressure Relief Valve 5-125 PSI max. Available in sizes 1/2"-2" NPT. Valves are ideally suited for chemical process, corrosive environments, and water or oil service. No metals in flow wetted areas. Configuration: Bottom inlet, side outlet in PVC, CPVC, or PVDF construction with soft seats for bubble tight leakage in EPDM, BUNA, and Viton ™. For back pressure/Bypass see series BPS05-P. .62 bar) multiple spring ranges and pressure classes 1/2"-2" NPT (For water, oil, air, chemicals, |
 |
Rvi20-P
High accuracy pressure control, diaphragm valve 0.5 to 75 PSI (0.03 to 5 Bar) (multiple spring ranges) 1/4"-2" NPT, 1/2"-2" ANSI & Sanitary Tri-Clamp flanges For water, oil, air, chemicals, gas Connections: In-line porting 303 & 316 stainless steel, Hastelloy, Monel, titanium, TFE, PVC |
 |
RVL20-P
High accuracy pressure control, diaphragm valve 0.5 to 75 PSI (0.03 to 5 Bar) (multiple spring ranges) 1/4"-2" NPT, 1/2"-2" ANSI & Sanitary Tri-Clamp flanges For water, oil, air, chemicals, gas Connections: In-line porting 303 & 316 stainless steel, Hastelloy, Monel, titanium, TFE, PVC |
